Duty Floor Epoxy Products: 3.0mm thick, the surface light, slip, at least 10 years. 
 Anti-corrosion epoxy floor has the following features: 
 1, acid, alkali, salt, oil and chemical solvents, in particular, acid, alkali, salt and other corrosive chemicals. 
 2, impact resistance, carrying heavy loads, good tensile strength, integrity privileged. 
 3, the film full, smooth, bright, attractive and durable, both the dust, cracking, leakage of water. 
 4, anti-stress, high clean, easy to clean. Needed to make smooth or slippery floors. 
 Scope: general chemical pool, tower, anti-cracking floors, laboratories, power plants, non-ferrous metal plants, food plants, electroplating plants, circuit board. 
 Construction method: ① water treatment: the first floor of the ground water must have been well handled; 
 ② prime deal: According to the prime position to do to polish, repair, removal; 
 ③ Epoxy Primer: Epoxy primer, with an exceptionally strong permeability and adhesion roll an epoxy primer to enhance the surface adhesion; 
 ④ Shop fiberglass cloth: the cloth placed on flat glass used in the deployment of a good epoxy floor coating adhesion to glass cloth and epoxy with a knife in the approved grant Tu Ping, uniform coating to enhance the resilience of the ground according to need to do one to three; 
 ⑤ in epoxy coating: add the appropriate amount of quartz sand epoxy resin, using trowel to evenly coated one to three; 
 ⑥ epoxy putty: the actual needs of the construction by two to three, required to achieve smooth and no holes to facilitate the construction of top coat; 
 ⑦ surface coating: epoxy self-leveling finish together with a trowel trowel coating, solvent-based epoxy paint or roll two slip finish, bright and clean after the completion of the overall ground color uniform, without hollowing.