First, the name 

 Heavy-duty self-leveling epoxy flooring 

 Second, the material 

 Epoxy heavy duty material 

 Third, the product performance 

 Corrosion resistance for different, use different resin materials, to prevent the corrosion of different media, good adhesion, resistance to corrosion, dust, wear, and not delamination. 

 Fourth, the construction steps 

 1, primary: the base surface treatment to achieve the flat, dry, clean effect. First of all damaged areas of the partial amendment to layer generally flat; water content less than 8%, the coating will not blister or delamination; Finally, grinding machine grinding, clean, so that more grass-roots level, but also increase the grass-roots adhesion layer and preservatives; 

 2, the primer: the resin by adding a certain percentage of adhesive agent and penetrating agent and then mixed evenly, coating the element on the ground, the resin with low viscosity and high permeability, ground penetrating primer, filling the pores, since to enhance the role of adhesion and foundation reinforcement. 

 3, the quartz mortar layer: Using heavy duty resin coating epoxy composite material by adding 1-3 times the quartz sand mix well, coating with a trowel on the primer to increase the surface roughness, thickness and improve the mechanical properties of the floor. 

 4, batch coating: mortar, after curing, coating with the PT-601 approved, approved uniform coating layer in the quartz mortar, mortar layer to seal the pores and enhance the resilience and smoothness of the floor. 

 5, top coat: pending coating fully cured, the polished until smooth and no traces, and then clean vacuum; then the top coat with a good anti-corrosion; adding a certain percentage of curing agent and the color paste stir, with professional trowel even the top coat trowel flat knife, top coating material for the self-leveling, covering power, and no seams, and the same color, clean and bright, nice.